Uninterruptible Power Supplies
OTHER RELATED PRODUCTS
SOURCE TRANSFER SWITCHES
• Master Switch STS
Installing a Master Switch static transfer switch provides additional resilience and protection from the disruption that can be caused by the failure of a single power source. The result is the absolute protection of industrial utilities and critical information technology against power supply and load faults.
Master Switch guarantees a source of redundant power, allowing the load to be switched between to alternative and independent power sources. Switching can be automatic (when a supply source falls outside of acceptable tolerances) or manually done by an operator from the front panel or remotely.
• Multi Switch STS
Multi Switch is a rackmount source transfer switch that can supply up to eight loads from two AC power sources. Should one source fail, the other automatically powers the load. The sources can be two separate AC sources including mains power and UPS, or a combination of the two.
The Multi Switch provides electrical distribution and remote management for up to eight network users, powered from two direct mains supplies or UPS or a combination of both. The Multi Switch can connect each load (up to eight, each with a maximum power demand not greater than 4A), to either of the two power sources (1 and 2). Load demand is shown on the LCD.
• Multi Switch ATS
The Multi Switch 16amp ATS provides direct distribution of eight 10A IEC supplies or one 16A IEC supply in a system with two input power supplies (two mains inputs, or two UPS or a combination of the two). Multi Switch ATS is able to connect to either of the two inut power supplies.
The Multi Switch ATS guarantees power operating continuity. The usage of ATS guarantees higher reliability then a single UPS with a bypass.
Multi Switch ATS can switch-off each group of output power-plugs separately.
In case of load malfunctions (e.g. short-circuit) the Multi Switch ATS disconnects the plugs where the load is connected, avoiding to disconnect other loads.
In case one of the 2 power supply is outside the tolerance range then the Multi Switch ATS will run using the second source (the switch from one source to the second is instantaneous in case they are in phase sink).
SOFTWARE AND ACCESSORIES
• PowerShield³ Communications Software
• PowerNetGuard Supervision Software
• NetMan Network Agents
• NetMan Environmental Sensors
• Multicom Protocol Converter
• Multicom Serial duplicator
• Multicom Serial Port / USB
• Multicom Serial Port / ESD
• Multicom Contacts / ESD Board
• Multi I/O Protocol and Contacts Converter
• I/O Expansion Board
• Communications Kit for AS400 and i-Series
• Multi Panel Remote Monitoring
NEW UPS SOLUTIONS
Uninterruptible Power Supplies from 400 VA-3000 kVA
 |
Win Dialog Plus 400-800 VA The Win Dialog Plus series includes the 400-600-800VA models and uses digital technology. The load is powered from the mains through an AVR to stabilise brownouts, sags, and surge voltages, and EMI filters to suppress spikes and transients. |
 | |
 |
iPlug 600-800 VA The iPlug series is the ideal solution for household, and small office systems. Its compact size and versatility, push-button operation, LED status panel and user replaceable batteries - make iPLUG easy to install within a domestic environment to protect systems from surges and blackouts. |
| |
 |
iDialog 400-1600 VA The iDialog range is the ideal solution for the protection of PCs and peripheral devices in domestic and office environments. iDialog is an easy-to-install and economical solution for protecting equipment such as: PCs, Media Centres and peripheral devices, TVs, Home Cinemas, Satellite and Digital Terrestrial Receivers, DVD players and writers; Modems and xDSL routers; Small household appliances. |
| |
 |
Net Dialog 800-2000 VA The Net Dialog series includes the 800-1000 1500-2000VA models and uses digital technology: the load is powered from the mains through an AVR to stabilise brownouts, sags, and surge voltages, and EMI filters to suppress spikes and transients. |
| |
 |
Vision 800-2000 VA The Vision UPS, offers superior protection, versatility, connectivity and advanced communications. Vision UPS is the ideal solution for the protection of peripheral network devices, servers, and network back-up systems. |
| |
 |
Dialog Vision 500-3000 VA The Dialog Vision series includes the DVR (Rack version) and DVD (Dual Rack/Tower version) with models from 500VA to 3000VA and uses sinewave digital technology. Dialog Vision is the best protection for network devices, rackmounted servers, conventional rack-mounted or tower servers, network storage systems. |
| |
 |
Sentinel Pro 700-3000 VA For business continuity applications requiring long battery runtimes, runtimes up to several hours are possible, using ER models fitted with more powerful battery chargers, and battery extension packs. |
| |
 |
Sentinel Dual low power 1-3 kVA Sentinel Dual is a new range of high density double conversion on-line UPS, suitable for powering a wide range of devices including servers, storage systems, telephony equipment - VoIP, network, medical and industrial systems. Sentinel Dual are ideal for powering and protecting Blade Server systems with high input power factor. |
| |
 |
Sentinel Dual high power 3.3-10 kVA Sentinel Dual is the best solution for powering mission critical applicaitons and eletro-medical devices requiring maximum power reliability. The UPS is suitable for a wide variety of applications, offering a flexible format (tower or rack), digital display, communication options and user-replaceable batteries. |
| |
 |
Sentinel Power 5-10 kVA Sentinel Power is the ideal solution for powering critical network systems and processes. EMI filters (input and output) significantly provide further immunity from mains disturbances and lightning strikes. |
| |
 |
Master Industrial 30-80 kVA The Master Industrial series UPS provide maximum protection and power quality for any type of load, especially industrial applications, manufacturing and petrochemical processes, electrical distribution and power plants. |
| |
 |
Multi Sentry 10-120 kVA The Multi Sentry series is ideal for protecting data centres and telecommunications systems, IT networks and critical systems. Its highly flexible design allows full compatibility with both three-phase and single-phase power supplies. |
| |
 |
Multi Guard 15-120 kVA The Multi Guard 15-120 kVA modular UPS is a scalable 3 Phase / 3 phase with double conversion Uninterruptible Power Supply system. Its power capacity ranges from 15kVA to 120kVA, delivering the best combination of reliability, functionality and flexibility. |
| |
 |
Master FC400 30-120 kVA The Master FC400 series static frequency converters are available from 30 to 120kVA, with a 50 or 60Hz input and a 400Hz output. The product of extended experience acquired in the UPS industry, the MP FC 400 series is distinguished by the use of technologically advanced components and for excellent reliability, ease of maintenance and easy of operation. |
| |
 |
Master HP 100-500 kVA Master HP Series provides maximum protection and power quality for data centres and industrial loads. The HP series provides exceptional operating efficiency (over more conventional thyristor rectifier-based systems), a compact footprint and easy maintenance access - all ideal for today's critical operating environments. |
| |
 |
Master MPS 10-800 kVA Master MPS series UPS provides maximum protection and power quality for critical loads, including data centres, industrial processes, telecommunications, security and electro-medical systems. |
| |
 |
Flywheel Energy Storage 40-1100 kVA The VDC series of flywheel energy storage systems provide Riello Master Plus UPS with a source of dc power that can be used to ride through short mains power supply failures. The length of supply available can be used to cover the start-up time of a standby generator or prevent the initial discharge of a locally connected battery set. |
| |